LS1 1kN (225 lbF)                    

• Uses high accuracy interchangeable YLC Series load cells (< 0.5% of reading)
  
• Large working area - 180 mm throat for large specimens
• Crosshead travel 500 mm (19.7 in) standard, 800 mm extended (31.5 in)
• Speed range 0.01-2032 mm/min (0.0004-80 in/min)
• Flexible work surface configurations (Base table (supplied as standard) and optional expanded work table, T-slot table and drip tray)
• Data sampling rate 8 kHz

LS2.5

• Uses high accuracy interchangeable YLC load cells (±0.5% from 1% to 100% of load cell value)
• Crosshead travel 1400 mm (55 in)
• Speed range 0.01 - 2032 mm/min (0.0004 to 80 in/min)
• Data sampling rate 8 kHz
• Saves up to 600 test results
• 10 programmable test set-ups
• High-resolution backlit LCD display with intuitive operator interface
• Flash memory upgradable

• Simple to set up, operate and maintain
• Load measuring system exceeds the requirements of all recognized international standards
• Uses high-accuracy interchangeable YLC load cells (±0.5% from 1% to 100% of load cell value)
• Crosshead travel 800 mm (31.5 in)
• Extended version available with travel up to 1400 mm (55 in)
• Speed range 0.01 - 1016 mm/min (0.0004 to 40 in/min)
• Data sampling rate 8 kHz
• Saves up to 600 test results
• 10 programmable test set-ups
• High-resolution backlit LCD display with intuitive operator interface
• Flash memory upgradable

LD series 5kN - 100kN

• 9 models available
• CANBUS interface supports communication with up to 8 devices such as robots, temperature chambers, extensometers, LVDT's and more
• S-beam and pancake load cells are available
• Pre loaded precision ball screws for excellent displacement accuracy
• Low profile base
• T-slot columns accept a range of accessories such as extensometers, robot arms, and splinter shields
• Extended columns for long travel applications
• Easy to use complete single package software with extensive library of pre-set ATSM, DIN, EN, and ISO test including a user configurable section for specialized testing
• Software supports video and still image capture for easy test play back and documentation
• Pogo option for very large samples
• Optional work tables
• Optional thermal chambers
• Optional video extensometer
  

• Crosshead travel 1150 mm (45.3 in)/ 1620 mm (63.8 in) for extended version
• Speed range 0.001 - 254 mm/min (0.00004 to 10 in/min)
• Data sampling rate 8 kHz
• Working width between the columns 620 mm (24.4)
• Floor standing model
• Load measuring system EN ISO7500:2004 Class 0.5 ASTM E4
• Software: Nexygenplus4

Please complete tester questionaire and return for a quotation

NEXYGENPlus multi-lingual materials testing software is the hub of the Lloyd Instruments Plus Series materials testing system . This extraordinarily easy to use and flexible software, allows the operator to control and monitor all aspects of the system from a single front end, ensuring fast, reliable and powerful testing and data analysis for tensile, compression, peeling, tearing, creep, relaxation and  flexural test applications.

With NEXYGENPlus software, the user can simply select from the extensive library of pre-defined test set-ups based on international standards to set up routine tests or create an advanced multi-stage test, all using the same program. Still picture and video capture are also included in the software as well as a powerful security and audit trail module to provide 100% traceability, full automation capability for automatic testing and much more.

Tested for Windows 7, 8, and 10.

NEXYGEN™ MT material test and data analysis software and Ondio application builder software packages has been replaced with NEXYGENPlus4. NEXYGEN MT is not tested for Windows operating systems beyond XP sp1. Any "plus" designated material tester should be upgraded to NEXYGENPlus4. A firmware upgrade to the test frame may be required to run the new software.

Available for Legacy Products. Contact us for more information!

TA1Texture Analyzer- The TA1 Texture Analyzer is an easy-to-use, cost-effective solution to evaluate the textural properties of a wide range of food at all stages of manufacture. It can perform rapid, detailed texture profile analysis (TPA) for applications up to 102 kgF (1 kN, 225 lbF). Many fixtures are available to measure the parameters below.

The TA1 can also perform packaging and other tests identical to those in the LS1.

The FT1 is a stand alone friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549.  The tester is supplied with these three standards pre-programmed, with a total of ten set-ups available for custom configuration. 

The FT1 can also perform packaging and other tests identical to those in the LS1.